Operator's manual
Arm
Flail head
- 45 -
6.2.
Mounting flail heads
Coupling Lama 121/ 141 mowing heads is significantly facilitated owing to application of
mountings. Mountings such as: basic mounting (Fig. 20, item 1), rotary mounting (item 2), hydraulic
turntable (item 3) are normally bolted to extension arm with 6 bolts.
Hydraulic turntable can be attached to mowing heads.
For Lama 121 and 141 heads it is possible to manually shift the head to the side in relation to
the arm. In order to perform this, first:
untighten 6 screws M14 (1) (Fig. 50),
move the head as desired,
tighten screws M14 (1).
Fig. 50. Lateral shift in relation to arm
Rotary mountings (item 2, Fig. 20), hydraulic turntable (item 3, Fig. 20) can be rotated
vertically. In case of the first type, the rotation is performed manually, and the hydraulic turntable
rotation is powered by the tractor's hydraulics. In order to turn head in rotary mounting (item 2, Fig.
20) perform the following:
lift the head over an even ground and set it horizontally,
remove safety cotter (1) (Fig. 51),
remove locking pin (2),
rotate the head as desired,
secure the head with the pin and the cotter.
Fig. 51. Rotary mounting
1
2
1
