Operator's manual
Arm
Flail head
- 44 -
5.5.2.
Basic information on mowing
Basing on long-term experience, in order to ensure the machine damage-free operation, it is
recommended to engage a pilot in front of the mower to mark any obstacle.
When traversing the road, pedestrian crossing or any other obstacle, the machine must be lifted
with use of cylinder 4.
Actually, the user must follow the common sense when operating the machine. Therefore, in case
of intensive operation, bear in mind expenses on necessary service checkups
–
see Warranty
terms.
Basing on experience, upon driving onto single shrub with section up to approx. 2 cm, the tractor
should be stopped for a while, until the machine shreds the shrub at the ground, and then slowly
with intervals drive forward, so there occurs no cutterbar locking.
6.
MOUNTING AND ADJUSTMENTS
6.1.
Mounting and dismounting flail head
Place machine on even ground and disconnect tractor's engine.
Mounting flail head on extension arm is performed with use of multi-purpose linkage with
mounting catch (5) (Fig. 49).
Prepare flail head (6), which first should be dismounted.
Lift extension arm and drive tractor away.
Drive the tractor and position extension arm so it is possible to attach a head.
Turn the tractor's engine off and take ignition key out.
Screw bolts in mounting catch (5) and connect quick fasteners (44). For Lama 120 P head,
connect 2 cables for rotation control of the moving part of ejector directly to push-in fittings of
tractor's hydraulics.
Fig. 49. Mounting flail head with use of multi-purpose linkage
In order to dismount flail head take analogical steps, that is place machine on even ground and
disconnect tractor’s engine. Then unscrew bolts in mounting catch (5) and disconnect quick fasteners
(44) (Fig. 49).
CAUTION:
The arm is equipped with set of twist-on push-in fittings designed for quick
mounting and dismounting of the cutterbar or working adapters.
5
44
6
