Operator’s manual
Double-sided disc mowers
with central suspension
- 41 -
Fig. 35a. Adjustment of the tine conditionre’s guard
(for mowers: KDD 860 S
(H)
, KDD 860 S T
(H)
, KDD 940 S
(H)
, KDD 940 S T
(H)
)
Fig. 35b. Adjustment of conditioner plate
(for mowers: KDD 861 S
(H)
, KDD 861 S T
(H)
, KDD 941 S
(H)
, KDD 941 S T
(H)
)
6.4.2.
Adjusting conditioner's shaft rpm
Depending on the required intensity of grass conditioning, adjust the conditioner's shaft
rotary rate. It can be adjusted within the range of 700 – 1000 rpm. To increase the shaft's rotary rate,
switch lever (A) (Fig. 36) from I to III. Set the lever in middle position – II – to stop the shaft.
WARNING:
Adjustment should be performed with PTO shaft's drive off.
Fig. 36. Lever for adjusting conditioner's shaft rpm
„+” - increasing plate -
conditioner clearance width
„-” - reducing plate –
conditioner clearance width
„+” - increasing plate -
conditioner clearance width
„-” - reducing plate –
conditioner clearance width
+
-
a)
+
-
+
-
b)
A
poz.
I
poz.
III
poz.
II
