Operator's manual
Two-rotor in-line rake
DUO 680
DUO 740
- 30 -
Fig. 35.
Tandem suspension cushioning short uneven ground sections
5.10.
Lifting the rake on turns
When driving back through already formed rows, lift the rake to its transport position. Perform
the following:
Operate single-side controller for lifting until the machine has been fully lifted,
Drive back or drive over the formed rows,
Operate single-side controller for lowering until the machine has been fully lowered,
Set the controller in zero position.
WARNING:
Due to the specific in-line design of the machine it is forbidden to take sharp
turns with the rotors lifted. Taking too sharp a turn may cause a fall or a
damage to the machine. The risk is analyzed in
Fig. 36
.
Fig. 36.
Risk of falling due to torque
M
when taking a tight turn with rotors lifted
F
F
M