Operator's manual
Two-rotor in-line rake
DUO 680
DUO 740
- 24 -
Fig. 26.
Example setting of both rake's segments
5.5.
Mounting PTO shaft
PTO shaft’s end with overrunning clutch should be mounted on rake’s side.
When connecting PTO shaft between tractor and rake make sure that external guard tube of the
shaft is on the tractor’s side. The PTO shaft plastic guards have to be secured by fastening their
small chains to immovable parts of tractor and rake. The PTO shaft must operate at the lowest
possible angle. This will ensure that both shaft and the machine last as long as possible.
CAUTION:
If need be, shorten the PTO haft according to its operator’s manual given by
the shaft’s manufacturer (
Fig. 27
).
Fig. 27.
Instruction of PTO shaft shortening
CAUTION:
Handle all parts with utmost care. Never place your hands or fingers between
one part and the other. Wear safety clothes such as gloves, protective
footwear and goggles. The operation of shortening must be carried out with
the utmost care as the PTO shaft will have to be replaced if the telescopic
shafts are shortened to an excessive extent.
~8' 7"
~18' 4"