Operator's manual
Two-rotor in-line rake
DUO 680
DUO 740
- 23 -
In order to dismount both rotors, perform the following:
disconnect drive shaft from the rear rotor and intermediate shaft located in the middle section of
the linkage (
Fig. 24
),
disconnect hydraulic hoses in linking point,
NOTICE:
Before disconnecting hydraulic hoses, rake carts must be in lowered position. Disconnecting
the hoses in the lifted position may lead to accidental falling of the machine.
unscrew eight mounting bolts for both linkage segments supporting them with transport holders,
NOTE:
When dismounting the linkage use lifting devices to support both segments with use of
transport holders.
Support rear section of the linkage so ground following locking cylinder of the rear rotor is not
tensed (
Fig. 25
),
Fig. 25.
Supporting rear section of linkage to avoid breaking the ground following mechanism of rear rotor
store both rake's segments on truck as required,
secure both segments against shifting during transportation.
Fig. 26
shows example setting of both raking mechanisms to reduce dimensions.
Ground following
locking cylinder of
rear rotor
Support