Operator's manual
Two-rotor in-line rake
DUO 680
DUO 740
- 16 -
In order to prepare the rake lifted on the tractor for transport do the following:
Set rear rotor so it is perfectly aligned with the front by means of turning cylinder,
For DUO 740, make sure that the controller ARDUO is set to rear rotor turning mode (
Fig. 10
),
Fig. 10.
Controller ARDUO with rake's rear rotor turning mode ON
After having been switched set the cylinder drive of the tractor until the rear rotor is aligned
with the front one (
Fig. 11
),
If need be, adjust the cylinder by driving the tractor forward,
Fig. 11.
Setting the proper transport position of the rear rotor
Lift rear swath guard (
Fig.
12
),
For DUO 680, manually lift the swath guard until it has been locked in vertical position by
pneumatic cylinders,
For DUO 740, select the correct option on the control panel ARDUO by pushing a button until
the corresponding diode under the option has been lit up – in this case lifting the rear swath
guard. Turn the corresponding lever for two-side operation on the tractor until the rear swath
screen has been lifted completely.
Fig. 12.
Lifting rear swath guard a) manually on DUO 680, b) hydraulically on DUO 740
Proper transport
position of the rear
rotor
Turn from
working position
DUO 680
DUO 740
Control panel
ARDUO
Rear rotor
turning mode
Rear swath
screen control
mode