Operator's manual
Two-rotor in-line rake
DUO 680
DUO 740
- 27 -
Fig. 29.
Adjusting the raking height
Lower the rake once again,
Unlock and lower safety guards of the rear rotor by performing actions as in
Fig. 21
,
Unlock and retract safety guards of the front rotor by performing the opposite as given in
Fig.
20
,
To set the machine in position for raking one or two rows tilt the raking assembly either left or
right with double-action cylinder for rear rotor position control.
Single windrow option
Lower rear swath guard by pulling it downwards,
If need be, set the distance between the rear guard and the rear rotor depending on the forage
quantity,
Fig. 30.
Position of rear rotor in working position with single windrow option
Dismount double-action cylinder of the rear rotor, so that the rotor is turned leftwards,
Drive the tractor until the rear rotor has been turned left to its maximum,
If need be, adjust the rear rotor position so that optimum overlapping of the rear and the front
rotor (
Z
) is achieved depending on the type of material being raked. Overlapping (
Z
) should be
adjusted in such way that between the rotors there is no material left on the ground.
~3.5"
~0"
up
down
up
down
Z