SALZBURGER GETREIDEMÜHLE MT 5, Owner'S Manual And User'S Manual

Page: 8 / 28

8
5. Defective or deficient electrical appliances must not be operated.
6. The seller must immediately be informed of any defects.
7. Only connect the mill to a correctly installed protective mains
socket. Before doing so, please check that the voltage specified on
the nameplate on the grain mill matches the voltage of the energy
supply.
8. Multiple plugs and extension cables must not be overloaded.
9. The cable of the mill must not be allowed to hang over the edge
of the table or work surface. Any contact with hot plates or any
other sources of heat must be strictly avoided at all times.
surfaces must be avoided
10. Leads to electrical appliances must not be laid or squashed over
sharp edges or moveable parts
11. Appliances must only be operated with the intended switches.
12. Safety devices must not be modified or turned of
13. Should any disturbances occur immediately turn the appliance off
and disconnect the plug.
14. Do not disconnect the plug from the mains socket by pulling on
the cable.
15. Only ever operate the mill on a flat, stable surface. The mill must
be positioned so that slipping of the mill itself or the flour
container during the milling process cannot occur. It is best to
place the mill on a firm surface, (such as a kitchen worktop). This
will ensure that the ventilation slots on the underside of the mill,
which serve to ventilate the motor, remain free.
16. Strict monitoring of the appliance is essential when being used by
children.
17. Strict monitoring of the appliance is essential when being used in
the vicinity of children.
18. Never operate the mill unless under supervision.
19. Always keep the mill out of the reach of children
20. The appliance must not be operated by persons with either