21
Problem Solutions
Problem
Cause
Solution
Motor is blocked and
cannot be switched on
Mill was adjusted in
stillstand mode from
„coarse“ to „fine“
although whole grain
kernels were between
the mill stones.
Reset the mill to a coarser
setting and then adjust slowly
to a finer setting
Grain was too damp
Dry grain
Grain was milled too
finely
Adjust the mill to a coarser
setting – especially when
milling oily grain such as rye
Especially small grain
kernels e.g. Quinoa
were processed
Fill very small grain kernels
slowly by hand into the
hopper.
Please dry damp grain
and/or use a coarser setting.
Mill stones are
smeared
Grain is too damp or
too oily
Oily grain very easily causes
smearing - use a coarser
setting
The mill was over-
loaded
Turn the motor off and leave
to cool for at least one hour
The mill has turned
itself off, after
about 30 minutes.
This is a normal way
of protecting the
appliance!
Flour spout is
blocked
Clear flour spout
Backlog of flour in
the container
Empty container
