18
The thread is adjusted smoothly and must not be oiled. Oil and flour together
leads to bonding of the thread
.
Closing the milling chamber:
Re-assembly of the hopper can only be carried out in one position.
Place the hopper in a straight position onto the bottom part of the mill and turn it
until the thread begins to engage. After having replaced the hopper you will find the
normal setting by turning the same (clockwise direction) in the “fine” direction until
it stops. Then open the hopper (anti-clockwise direction) until both red points match.
Care and Cleaning
In order to maintain the functioning of your mill no special care or maintenance is
needed for operation of the mill. Only keeping the thread clean is important.
.
Cleaning of the millstones:
Coarse milling of rice kernels will clean the stones. No not apply water
or other fluids to clean the mill stones.
I
f
you operate your mill regularly cleaning the mill stones is not necessary.
Milling of rice will clean the mill stones even removing residue from oily grain types
or spices, etc
