8
7.
The cable of the mill must not be allowed to hang over the edge of the
table or work surface. Any contact with hot plates or any other sources
of heat must be strictly avoided at all times. surfaces must be avoided
8.
10.
11.
Leads to electrical appliances must not be laid or squashed over
sharp edges or moveable parts
12.
Appliances must only be operated with the intended switches.
13.
S
afety
devices
must
not
be
modified
or
turned
off.
14.
Should any disturbances occur immediately turn the appliance and disconnect the
plug.
15.
Do not disconnect the plug from the mains socket by pulling on the cable.
16.
Only ever operate the mill on a flat, stable surface.
The
mill
must
be
positioned
so
that
slipping
of
the
mill
itself
or
the
flour
container
during
the
milling
process
cannot
occur.
It is best to place the mill on a firm surface, (such as a kitchen worktop).
This will ensure that the ventilation slots on the underside of the mill,
which serve to ventilate the motor, remain free.
17. Strict m
onitoring
of
the
appliance
is
essential
when
being
used
by
children.
18. S
trict m
onitoring
of
the
appliance
is
essential
when
being
used
in the vicinity
of
children.
19. Never operate the mill unless under supervision.
20. Always keep the mill out of the reach of children
21.
The
appliance
must
not
be
operated
by
persons
with
either
physical
or
mental
handicaps
or
those
who
do
not
have
sufficient
knowledge
of
the
safe
operation
of
the
appliance.
The
exception
to
such
ope-
ration
of
the
appliance
is
when
used
under
supervision
of
persons
responsible
for
the
safety
of
any
handicapped
persons
22. Never immerse the mill or parts of the same into water or other
liquids. Never connect a wet plug to the mains socket or touch it if
your hands are wet.
23. Any screw fittings which require a screw driver to open must not be
opened.
