22
Problem
Cause
Solution
The mill has turned
itself off, after about
40 minutes. This is a
normal way of
protecting the
appliance!
Grain is either too
damp or too oily
Please dry damp grain
and/or use a coarser setting.
Oily grain very easily causes
smearing - use a coarser
setting
Hopper is turning
independently
towards a coarser
setting
Tighten locking screw
Mill no longer
processes fine
enough
Locking screw worn
at front
Grind surface of locking
screw at the front or renew.
Hopper can no longer
be opened
Mill was subjected to
too much humidity.
Set mill up in a dry place.
