![background image](http://html1.mh-extra.com/html/salvis/fs-1-1-p/fs-1-1-p_installation-and-operating-instructions-manual_804157036.webp)
- 36 -
6.10 Clearing a program
P
program to be cleared (deleted).
Press
P
and enter program number
.
Clear the program with the following key combination:
C
M
program no.
.
6.11 Write and store new program
To switch on the appliance, press
.
LED’s
P
and
are blinking.
Press
P
, the display shows the program number last
entered.
Press
P
,
is blinking.
Enter a non occupied program number (refer to program
register), for example
.
An empty program number can be displayed by pressing
M
and
0
together.
Programming phase 1:
Press
1 - 3
,
appears.
Press
, enter value, e.g.
Press
, enter value, e.g.
Press
to save your selection.
Programming phases 2 and 3:
Press
1 - 3
twice,
appears
Press
1 - 3
twice,
appears
Program the two phases analoguos the first one.
To store the program press
M
,
is blinking.
Enter program number
.
Press
to save the program.
6.12 Control by core temperature (Option)
- Insert core temperature sensor into the middle of the
food. Lock the door.
P
Select a program or
Select oven temperature
Select core temperature 20 - 100°C
Start process
- Timer is inoperable
- After the set temperature is reached, the buzzer
sounds or the process jumps to the next phase.
- If the sensor is not inserted into the food, the sensor
temperature rises too quickly. An operating error 12 is
displayed. The buzzer sounds until cancelled.
- If one wishes to increase the core temperature after it
is reached, a temperature difference of at least +3°C is
necessary.
6.13 Setting the starting time preselection
Enter the desired cooking program
P
.
Press
; LED blinks.
The last entry is displayed.
Press
; LED blinks.
The display shows
.
Enter
on the numeric keyboard.
Press
to save your entry.
Press start
. All displays go out.
The appliance will automatically start at the set time
.
When the cooking program has finished the buzzer
sounds. To activate the display light and show the clock,
press
.
To return to the starting time preselection mode, press
the keys
and
.
To show the actual time and the program number, press
the key
.
.
6.14 Setting the clock, date and year
For setting, the appliance must be in switched on state.
Either
P
is blinking
or the LED’s
and
P
are blinking.
Setting the clock:
Press
and enter the time in hours and minutes
, using the point
.
as a separator.
Confirm by pressing
Setting the date:
Press
, then
Enter day and month
, using the point
.
as a separator.
Confirm by pressing
Setting the year:
Press
, then
Enter year
.
Confirm by pressing
Press
again to return to the clock.
Note: After a longer period of disconnection of the
appliance the clock has to be readjusted.
6.15 Regenerating
- When the display shows
, further cooking
processes can be started, depending on the water
credit.
- When the display shows
, the appliance
will need to be regenerated.
- Normal operation is now blocked and no new cooking
process can be started. Check that the current
cooking process has been fully completed before you
start regeneration.