background image

8         Fan Coil FC600 Instruction Manual

M

M

M

1.  Auto heat/cool selection

This icon is visible when the thermostat is running in auto heat/
cool changeover.

14. AM/PM

Appears when you have 12 hours clock format.

2.  Schedule icon 

This icon is visible when the thermostat is programmable and is 
following the schedule.

15. Eco Mode

This icon is visible when the thermostat runs in Eco Mode.

3.  Permanent/temporary override

This icon is visible always when the thermostat is digital (non-
programmable) or when permanent override is enabled. When 
temporary override is enabled, the icon will appear next to the 
schedule icon.

16.  Current day of the program

The current day of the program is underlined.

4.  Fan icon

This icon is animating in sequence when the fan is 
running.

17. Clear filter reminder

This icon is visible when the filters have to be replaced.

5.  Fan speed (low, medium, high, Auto, OFF)

This icon shows fan speed and status.

18. Current time

Time Display.

6.  Wireless communication icon

This icon appears when the thermostat is connected 
to the Universal Gateway.

19. Sensor indicators

This icon is visible when a sensor is connected to S1/Com or S2/
COM terminals. 

7.  Glob icon

This icon is appears when the thermostat is 
connected to the Universal Gateway and App via 
Internet.

20. Timer icon

Icon appears during programming schedules, 
indicates start time for a program.

8.  Temperature unit

C or F

21. Program number

Shows the program number when thermostat 
follows schedule.

9.  Heating Mode ON

This icon indicates heating mode. Animating when 
calling for heat.

22. S1/COM Sensor indicators

Shows a sensor is connected to the S1/COM 
terminal.

10. Cooling Mode On

This icon indicates cooling mode. Animating when 
calling for cooling. 

23. S1/COM Sensor indicators

Shows a sensor is connected to the S2/COM 
terminal.

11. STANDBY mode

This icon indicates the thermostat is in STANDBY 
Mode or Frost Protection.

24. Room/set point temperature

Indicates current room temperature, setpoint 
temperature etc.

12. Occupancy/vacancy sensor

Man in door when presence detected    , empty 
door when not. 

25. Set point temperature indicator

Icon appears when a new setpoint temperature is 
being set.

13. Lock function

This icon indicates the keys of the device are locked.

M

M

low

medium

OFF

high

M M

M M

Summary of Contents for FC600

































































Reviews: