Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
84
Returns the required parameters to read twice
Added additional bit 0xD.
Instructions are separated by ";", and the instruction is read first.
Fig.78 The execution of multiple commands
(4)
If you want to read the values of <X>, <Y>, <R>, <
θ
> and Freq continuously, you can set the transfer interval
time as Fig.79.
Note that when use this software to control the SE1201, the LCD display will refresh at the same time. For example,
if <Sens: 100mV> is corresponding to the
“
25
”
command. <Sens> will change to <Sens: 50mV> when the SE1201
receives the
“
24
”
command.
The SE1201 can use many versions of serial debugging assistant. You can use other software to control the SE1201
remotely.
