Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
48
The program configuration area of input signal is as shown in the red box in Fig.40. The details of the configuration are
listed on Table 3.
Fig.40 The Configuration Area of Input Signal
Table 3. Input Configuration
Input Source
Single-Ended Voltage
Differential Voltage
Current
Current Impedance
1MOhm Current Gain
100MOhm Current Gain
Input Shield Grounding
Float
Ground
Input Coupling
AC coupling
DC coupling
Input Notch Filter
None
Line Notch
Both Notch Filters
2
×
Line Notch
Note that:
After finishing all the settings, click
to finish the configuration for input signal. All
settings can be changed at the same time and you just need to click this button once.
