salmson SIE, Installation And Starting Instructions, Page: 81 / 272

English
Installation and operating instructions SIE-DIE-PBE 75
NOTE
The terminals In1, In2, AUX, GND, Ext. off and MP meet the require-
ment for “safe isolation” (in acc. with EN 61800-5-1) to the mains
terminals, as well as to the SBM and SSM terminals (and vice versa).
NOTE
The control is designed as a PELV (protective extra low voltage) cir-
cuit, meaning that the (internal) supply meets the requirements for
safe supply isolation; the GND is connected to PE.
Differential pressure sensor
connection
NOTE
The electrical connection of the differential pressure sensor is to be
fed through the smallest threaded cable connection (M12) on the
module.
Procedure • Establish connections observing the terminal allocation.
• Earth the pump/installation in accordance with regulations.
8 Operation
8.1 Operating elements The electronics module is operated using the following operating ele-
ments:
The red button
The red button (Fig. 24) can be turned to select menu elements and
used to change values. Pressing the red button activates a selected
menu element and confirms values.
DIP switch
The DIP switches (Fig. 8, Item 6/Fig. 25) are located under the housing
cover.
• Switch 1 is for switching between the standard and service mode.
For additional information, see Section 8.6.6 “Activating/deactivating
service mode” on page 82.
• Switch 2 allows activation or deactivation of the access disable fea-
ture.
For additional information, see Section 8.6.7 “Activating/deactivating
access disable” on page 82.
• Switches 3 and 4 permit termination of the multi-pump communica-
tion.
For additional information, see Section 8.6.8 “Activating/deactivating
termination” on page 82.
Cable Colour Terminal Function
1 black IN1 Signal
2 blue GND Earth
3 brown +24 V +24 V
Fig. 24: The red button
Fig. 25: DIP switch
1 2 3 4
ON