salmson SIE, Installation And Starting Instructions, Page: 105 / 272

English
Installation and operating instructions SIE-DIE-PBE 99
11.3 Acknowledging errors
General
In the event of an error, the error page is displayed instead of the sta-
tus page.
In this case, the following procedure can generally be used for naviga-
tion (Fig. 41):
• To change to the menu mode, press the red button.
Menu number <6.0.0.0> flashes on the display.
By turning the red button, it is possible to navigate in the menu as
usual.
• Press the red button.
Menu number <6.0.0.0> appears steady on the display.
On the units display, the current incidence (x) as well as the maximum
incidence of the error (y) are displayed in the format 'x/y'.
Until the error can be acknowledged, pressing the red button again
will cause a return to menu mode.
NOTE:
A 30-second time-out causes the display to revert to the status page
or error page.
NOTE:
Every error number has its own error meter, which counts the inci-
dence of the error within the last 24 hours and is reset after manual
acknowledgement, 24-hour continuous “mains On” or a new
“mains On”.
Electronics
errors E070 Internal communica-
tion error (SPI) Internal electronics error Ask After-Sales. A A
E071 EEPROM error Internal electronics error Ask After-Sales. A A
E072 Power section/fre-
quency converter Internal electronics error Ask After-Sales. A A
E076 Internal transformer
defective Internal electronics error Ask After-Sales. A A
E077 24 V operating voltage
for sensor defective Sensor defective or con-
nected incorrectly Check differential pressure
sensor connection A A
E096 Infobyte not set Internal electronics error Ask After-Sales. A A
E097 Flexpump data record
missing Internal electronics error Ask After-Sales. A A
E098 Flexpump data record
invalid Internal electronics error Ask After-Sales. A A
Classification No. Error Cause Remedy Error type
HV AC
Fig. 41: Navigation in case of error
6.0.0.0
6.0.0.0
1/1 S
10
E000
5.0.0.0
E000