background image

5

SALICRU

2.  QUALITY AND STANDARD GUARANTEING. 

2.1. 

MANAGEMENT DECLARATION.

Our target is the client’s satisfaction, therefore this Management 
has  decided  to  establish  a  Quality  and  Environmental  policy,  by 
means  of  installation  a  Quality  and  Environmental  Management 
System that becomes us capable to comply the requirements de-
manded  by  the  standard 

ISO  9001:2000

  and 

ISO  14001:2004

 

and by our Clients and concerned parts too.

Likewise, the 

SALICRU

 Management is committed with the devel-

opment and improvement of the Quality and Environmental Man-
agement System, through:

 The communication to all the company about the importance 

• 

of satisfaction both in the client’s requirements and in the legal 
and regulations.
 The Quality and Environmental Policy diffusion and the fixation 

• 

of the Quality and Environment targets.
 To carry out revisions by the Management.

• 

 To provide the needed resources.

• 

Management agent

The Management has designated as management agent the person 
in charge about the Quality and Environment department, who with 
independence  of  other  responsibilities,  has  the  responsibility  and 
authority: to assure that the processes of the quality and environ-
mental  management  system  are  established  and  maintained;  to 
inform to the Management about the operating of the quality and 
environmental management system, including the necessities for 
the improvement; and to promote the knowledge of the client’s re-
quirements and environmental requirements at all the levels of the 
organization.

In the next PROCESS MAP is represented the interaction among 
all  the  processes  of  the  Quality  and  Environmental  System  of 

SALICRU

:

2.2.  

STANDARD.

The UPS product 

SLC TWIN

 series is designed, manufactured and 

commercialized in accordance with the standard 

EN ISO 9001

 of 

Quality Assurance. The 

 marking shows the conformity to the 

EEC Directive (quoted between brackets) by means of the applica-
tion of the following standards:

 

• 

2006/95/EC

 Low Voltage Safety.

 

• 

2004/108/EC

 Electromagnetic Compatibility (EMC).

In accordance with the harmonised standards. Reference standards:

 

• 

EN  60950-1

: IT equipments. Safety. Part 1: General require-

ments.
 

• 

EN 62040-2

: An interruptible power supply (UPS). Part 2: EMC 

requirements.

EN  62040-3

• 

:  An  interruptible  power  supply  (UPS).  Part  3: 

methods of specifying the performance and test requirements.

2.3.  

ENVIRONMENT.

This product has been designed to respect the environment and has 
been manufactured in accordance with the standard ISO 14001.

Recycling the UPS SLC TWIN series at the end of its useful life:

SALICRU

 commits to use the services of authorised societies and 

according to the regulations, in order to treat the recovered product 
at the end of its useful life (contact your distributor).

Packing

:   To recycle the packing, by following the legal regula-

tions in force.

Batteries:

   The batteries mean a serious danger for health and 

environment. The disposal of them must be done in 
accordance with the standards in force.

fig. 0. 

Quality and environment process map.

PROCESO DE MEJORA CONTINUA / REVISIÓN DIRECCIÓN

PROCESO GESTIÓN 

MEDIO AMBIENTE

PROCESO R 

&

 D

PROCESO OfICINA 

TÉCNICA

PROCESO 

COMERCIAL

PROCESO 

fABRICACIÓN

PROCESO LOGÍSTICA INTERNA

PROCESO MANTENIMIENTO

PROCESO fORMACIÓN

CLIENTES

CLIENTES:

- PRODUCTO

- SERVICIO

PROCESO GESTIÓN 

CALIDAD

Summary of Contents for SLC TWIN series






























































Reviews: