Salicru SLC TWIN series, User Manual, Page: 48 / 61

15
SALICRU
4.7. COMMUNICATION PORTS.
4.7.1. RS-232 interface.
Pin-out and DB-9 connector description:
Pin # Description I/O
2 TxD Output
3 RxD Input
5 GND Input
4.7.2. AS400 interface (Option).
Except for the above communication protocol, this UPS series has
available the AS400 card (optional). Contact with the distributor for
more details.
Pin-out and DB-9 connector description of the AS400 card.
Pin # Description I/O Pin # Description I/O
1 Fallo SAI Output 6 Bypass Output
2 General alarm Output 7 Low battery Output
3 GND Input 8 UPS ON Output
4 Remote Shutdown Input 9 Mains fault Output
5 Common Input
COMMON
BYPASS
LOW BATTERY
UPS ON
MAINS fAULT
REMOTE ShUTDOWN
GENERAL ALARM
UPS fAULT
GND
DB-9 interface of AS400 communication protocol. fig. 13.
4.8. SOfTWARE.
free software - WinPower.
WinPower is the brand of the new UPS monitoring software, which
facilitates a friendly monitoring and control interface. This software
gives an automatic Shutdown for a system made by several PCs in
case of mains failure. With this software, the users can monitor and
control any SAI of the same IT network LAN without taking care
about the distance among them.
Installation procedure:
Insert the supplied CD. The installation assistance will boot 1.
automatically. Follow the stated steps by itself.
When it is asked, enter the serial number written over the CD. 2.
When the PC reboots, the WinPower software will be showed as a
plug icon with green colour in the system tray, near to the clock.