28
SALICRU
Input information and
battery voltage
Fault information
Battery charge level
information
Discharge time
information
Information about
the charge level
connected to the
output
Information about the operating mode of the device
Output information
Audible alarm
disabled
Fig. 23.
Control panel with LCD.
7.2.2. Messages shown on the LCD.
Display
Function
Backup time information.
Indicates the backup time.
H - Hours, M - Minutes, S - Seconds.
Fault information.
Indicates as a warning that a fault has occurred.
Indicates a numerical code from the settings menu shown
in Table 9 of Section 7.5.
Audible alarm information.
Indicates that the audible alarm is disabled.
Information on output voltage.
Indicates the error or fault codes shown in table 13 of
section 7.7
Information about the charge level connected to the output.
Indicates the charge level connected to the output as a
%, by displaying four equivalent segments respectively in
the following proportion: 0-25 %, 26-50 %, 51-75 % and
76-100 %.
Information about programmable outputs
P1
Indicates that the programmable outputs are activated.
Information about the operating mode of the device.
BATTERY
Indicates that the device is supplying output voltage from
the battery (battery mode).
BYPASS
Indicates that the device is activated in ECO mode.
ECO
Indicates that the device is supplying output voltage from
the bypass (ECO mode).
ONLINE
Indicates that the inverter is working.
P1
Indicates that the output is activated.
Information about battery charge level.
Indicates the battery charge level as a %, by displaying
four equivalent segments respectively in the following
proportion: 0-25 %, 26-50 %, 51-75 % and 76-100 %.
BATT
FAULT
Indicates that the battery is not connected.
Indicates low battery voltage level.
Information about input and battery voltage.
Indicates the input voltage, frequency or battery voltage.
V AC - Input voltage, V DC - Battery voltage, Hz - Input
frequency.
Tab. 8.
Instructions shown on the LCD of the control panel.
