my lid. What is stuck?
lid gently to make it go back down. Then turn the lid
clockwise to unlock the lid. If it is still stuck, unplugging the
unit may help.
8. What is the clear plastic part
that came with my pressure
cooker?
It is the Condensation Cup: Refer to part (12) on pages 5 and
8 to attach the condensation cup to the back of the pressure
cooker.
9. I've programmed the
pressure cooker to cook but it's
just sitting there and nothing
appears to be happening.
The unit is still building pressure. This can take between 5-
40 minutes depending on the quantity and weight of food in
the pressure cooker.
10. The unit is DEAD or has
NO POWER.
The fuse in the unit has shorted out. This happens if the unit
is cooked without enough liquid in the inner pot or if there is
too much electrical current going to the cooker. Please
contact customer service for a replacement fuse.
11. The LED display shows E4
error.
Unplug the power cord from the wall outlet. Wait
approximately 15 minutes. Plug the power cord back into the
wall outlet. Press "CANCEL" button on the pressure cooker.
Select cooking process to begin cooking.
12. My food is burned at the
bottom of the inner pot.
There is not enough liquid in the inner pot. Add more liquid
to your inner pot contents.
PROBLEM
POSSIBLE REASON
SOLUTION
13. I'm having trouble
closing the lid.
Sealing ring improperly
installed.
Re-position the sealing ring.
Float valve in the UP position.
Gently push the Float valve down.
14. I'm having trouble
opening the lid.
Pressure has not been fully
released.
Gently turn the Pressure limiting
valve to VENTING to release
remaining pressure.
Float valve in the UP position.
Gently push the Float valve down.
15. A lot of steam keeps
shooting out from the
valve during cooking.
The valve is in VENTING
position.
Move the Pressure limiting valve
to SEALING position.
16. Display shows E3.
Overheating is detected.
Press CANCEL to stop cooking
