– 73 –
⑮
Scraper
When the blade is worn, adjust the scraper properly. See page 30 for adjustment. If the
clearance is beyond the adjustable range, change the blade.
WARNING
Use care not to get your fingers caught between the scraper blade and drum.
⑯
Air cleaner
When the red float of the dust indicator reaches the
service level (a mark on the indicator), clean the element
as described below:
1) Remove the clip and pull out the element.
2) Blow compressed air from inside of the element to
clean.
WARNING
Exercise caution not to get a speck of dust in your
eye.
3) Check the element for damage. Change if found to be abnormal.
4) Refit the element, tighten the clip, and the reset botton of the dust indicator is pushed.
CAUTION
Replace the element when the red float reaches the service level even if it is
cleaned.
NOTE: In normal use, change the outer element once in every six cleanings.
Reset botton
Clip
Dust indicator
