– 40 –
2.3.7 Check after stopping the engine
1) Perform the walk afround checks for oil and water leakage, abnormal signs around the
drums.
2) Fill the fuel tank.
3) Remove waste paper if any from the engine compartment, as this will pose a possible fire
hazard.
4) Scrape mud or other materials from and around the drums.
2.4 Vibratory Operation
1) Set the vibration speed changeover switch in the HIGH position.
2) Use vibration amplitude selector switch
Ⓐ
to select low or high amplitude vibration and
select vibration ON or OFF.
: High amplitude vibration
: Vibration stop
: Low amplitude vibration
3) Vibration drum selector switch
Ⓑ
permits selection of
front/rear drum vibration, front drum vibration, or rear
drum vibration.
: The front drum vibrates.
: The front and rear drums (both drums) vibrate.
: The rear drum vibrates.
4) The switch permits selection of automatic or manual
vibration selector switch
Ⓒ
. No matter what mode the
machine is in, vibration will stop when the F-R lever is
set in the neutral position.
Vibration amplitude selector switch
Ⓐ
Vibration drum selector switch
Ⓑ
F R
F R
F R
AUTO
Vibration selector switch
Ⓒ
