– 71 –
Vibrator
1) Rotate the drum till the drain plug comes to bottom.
2) Remove the drain , level and fill hole plugs.
3) Drain the vibrator oil.
4) Wash clean the removed plugs, and refit the drain plug.
5) Fill oil through the fill port till it overflows from the fill port.
6) Refit the level plug and fill port plug.
WARNING
When draining a hot oil, use care not to get burned.
CAUTION
The oil quantity of the vibrator is 20 liters (5.3 gal.).
Never supply oil more than that.
Gear case : Wheel motor
1) Remove the filter plug, level plug, and drain plug
while the oil is still warm.
2) After draining oil from the gear case, attach the drain
plug.
3) Supply oil through the filler port until the oil overflows
the level port.
4) Attach the filler plug and level plug.
5) Run the vehicle once after oil is supplied. Check the
quantity of oil again at the level port several minutes
later.
WARNING
When draining a hot oil, use care not to get burned.
CAUTION
The quantity of oil in the gear case is 2.0 liters (0.5 gal.).
Drain plug
Level plug
Fill hole plug
Drain plug
Level plug
Fill hole plug
