– 26 –
For the intermittent sprinkling, set the sprinkler timer at
the desired sprinkling duration and idling duration (SPRAY
dial
Ⓓ
, PAUSE dial
Ⓔ
). Then turn sprinkler selector
switch
Ⓒ
to the TIMER position. Sprinkling will start.
Sprinkling duration can be adjusted within 0 ~ 20 seconds
with dial
Ⓓ
. Idling duration can be set within 0 ~ 60
seconds by turning dial
Ⓔ
. Adjsut the dials to meet job
conditions.
The sprinkler indicator lamp stays bright as long as the sprinkling is being performed.
The table below serves as a guide for sprinkling and idling durations.
For normal operation (3 km/h,1.9 mile/h), use the sprinkler with a sprinkling duration of 5
seconds and an idling duration of 30 seconds. Adjust according to job requireements.
When compacting asphalt mixes, select CONT to fully wet the drum surface, then switch to
TIMER. Follow the same procedure for starting the work after a short break.
Hazard Switch
Pushing the switch causes direction indicator
lamp and indicator lamp Monitor display start to flash
simultaneously. Pushing the switch again causes the
lamps to go off.
ON
OFF
SPRAY
PAUSE
Ⓓ
Ⓔ
Vehicle speed
(km/h)
Sprinkling duration
(seconds)
Idling duration
(seconds)
2 (1.2 mile/h)
3 (1.9 mile/h)
4 (2.5 mile/h)
5 (3.1 mile/h)
7 ~ 8
4 ~ 5
3 ~ 4
2.5 ~ 3.5
35 ~ 40
30 ~ 35
25 ~ 30
20 ~ 25
