– 14 –
■
Inspect or service your machine with the engine stopped.
• If required to keep the engine running in such a case
as radiator interior cleaning, perform the work with
two persons. One of them should sit on the operator’s
seat getting ready for shutting down the engine. He
must take care not to touch any of controls carelessly.
Maintenance personnel must exercise extreme caution
not to make contact with moving parts.
■
Supplying fuel and oils
• Spilled fuel or oil will be slippery. Wipe up immediately. Keep the filler caps tight. Do not use
fuel for flushing oil. Handle fuel and oil in a well ventilated area.
■
Check the coolant level in the radiator.
• To check the coolant level, shut down the engine and allow the engine and radiator to cool
down.
■
Illumination
• For inspecting the level of the fuel, oil, coolant and
battery electrolyte, use burn-proof illuminations.
Failure to use this type of illumination can result in an
explosion.
1.11 During Servicing
■
Keep unauthorized persons away
• During service, do not allow persons not concerned
to enter the work area, particularly when grinding or
welding operation is performed or heavy hammers are
being used.
■
Keep your machine clean
• Spilled oil, grease or scattered debris are dangerous. Always keep your machine clean.
Moisture that penetrates into the electrical system can cause malfunctions. Do not use
water to clean sensors, connectors and the operator’s station.
■
When repairing the electrical system
• For repairing the electrical system or for conducting
welding, disconnect the negative cable from the battery
to shut off the electricity.
WARNING: Negligence of these instructions can lead to accidents.
OFF ON
STA
RT
