Sakai SV410-2, Shop Manual

Page: 150 / 270

6-020
VIBRATORY DRUM • REAR AXLE
14) Attach a lifting bolt (M10×1.5) to the end of the
vibrator shaft (4). Then lift with a crane, slowly
lower and attach.
When inserting the vibrator shaft into the
vibrator bearing for attachment, be careful
not to allow the inner race of the vibrator
bearing to lean.
Vibrator shaft: 135 kg (298 lbs.)
15) Attach the O-ring (35) to the axle shaft (32)
subassembly.
Lightly apply grease to the entire circumference
of the O-ring (35).
Lift and slowly lower the axle shaft (32)
subassembly with a crane.
When attaching the axle shaft, move the
vibrator shaft until the center of the
vibrator bearing inner race is aligned with
the center of the shaft. Be careful not to
allow the vibrator bearing to lean.
Axle shaft (32) subassembly
: 150 kg (331 lbs.)
16) Using the sixteen bolts (9) and washers, firmly
secure the axle shaft subassembly to the drum.
NOTE: When attaching, make sure that the
O-ring does not protrude from the
groove.
(21) M16×50: 270 N·m (199 lbf·ft)
•
•
SV400-2-06042
Lower with crane
4
SV400-2-06042
Lower with crane
4
SV400-2-06043
Lower with crane
32
35
SV400-2-06043
Lower with crane
32
35
SV400-2-06044
9
SV400-2-06044
9