Sakai SV410-2, Shop Manual

Page: 148 / 270

6-018
VIBRATORY DRUM • REAR AXLE
8) Install the oil seal (28) to the cover (22).
Lightly apply grease to the lip surfaces of the oil
seal (28).
Using the six bolts (29) and spring washers,
firmly secure the cover (22) to the housing.
(29) M12×40: 108 N·m (80 lbf·ft)
9) Lightly apply gear oil to the press-fitting surface
of the vibrator bearing (3).
Drive the vibrator bearing (3) into the axle shaft
(36).
Axle shaft : 100 kg (220 lbs.)
Vibrator bearing : 10 kg (22 lbs.)
10) Install the O-ring (35) to the housing (36).
Lightly apply grease to the entire circumference
of the O-ring (35).
Using the sixteen bolts (34) and washers, firmly
secure the housing (36) to the drum.
(34) M16×50: 270 N·m (199 lbf·ft)
NOTE : When installing, make sure that the
O-ring does not protrude from the
groove.
Use aids such as work stepladders when
working, and work with a natural, unstrained
posture.
•
•
•
•
•
SV400-2-06037
22
29
28
SV400-2-06037
22
29
28
SV410-2-06007
36
3
SV410-2-06007
36
3
SV410-2-06005
34 35 36
SV410-2-06005
34 35 36