5
P/N
DESCRIPTION
QUANTITY
ACCESSORY KIT
210986
150 Foot Long Remote Control Cord – P/N 210893
1 EA
Operation Manual
1 EA
Stator Bar Cover Plate – P/N 210031
1 EA
INSTALLATION KIT
211949
Hose Sleeve, 4" – P/N 210993
1 EA
Worm Drive Hose Clamp, 4" – P/N 162485
2 EA
Marine Exhaust Hose, 4" X 24" – P/N 210945
1 EA
Accessory and Installation Kits
GASOLINE ENGINE DRIVEN INSULATION BLOWING MACHINE
Check the accessory and installation kits included with new delivered machines that the following items were received for operation.
The following items are available through CTMW and required for installation:
210987 Engine Air Intake and Exhaust Kit
1 EA
210961 Blower Outside Air Intake Kit
1 EA
P/N
DESCRIPTION
QUANTITY
ACCESSORY KIT
210988
150 Foot Long Remote Control Cord – P/N 210893
1 EA
Operation Manual
1 EA
Stator Bar Cover Plate – P/N 210031
1 EA
INSTALLATION KIT
211950
Marine Exhaust Hose, 4" X 24" – P/N 210945
1 EA
PTO Drive Belt Idler Support B – P/N 209899
1 EA
3TB50 Pulley, (Uses P1 Bushing) – P/N 160263
1 EA
Holder, Circuit Breaker – P/N 162000
1 EA
Hose Sleeve, 4" - P/N 210993
1 EA
PTO Idler Rollere Take Ip Arm – P/N 209916
1 EA
Bushing, Idler, 5/8" - P/N 162487
1 EA
Worm Drive Hose Clamp, 4" – P/N 162485
2 EA
Gearbox PTO Idler Spacer - P/N 210544
1 EA
Breaker, Circuit 20A – P/N 159034
1 EA
POWER TAKE-OFF DRIVEN INSULATION BLOWING MACHINE
The following items are available through CTMW and required for installation:
209924 PTO Brg.U-T Short Bolt-On Mnt.
1 EA
209925 PTO Brg.U-T Short Bolt-On Mnt.
1 EA
210166 Under Truck PTO Tie Plate
1 EA
209329 End Yoke, 1.25, Drilled & Tapped
2 EA
210141 Jackshaft
1 EA
162819 EXP, 1.25 P/B, V3, Mach & U/Truck
1 EA
162818 Non-EXP, 1.25 P/B, V3 & U/Truck
1 EA
Summary of Contents for CertainTeed Volu-Matic 200
