18
6.
To adjust the transmission
17
, refer to the chart and select an appropriate gear for material and type of
operation. Shift the lever
18
into gear in accordance with decal instructions on the machine front panel.
Since the transmission is not synchronous, it may be necessary to pull the gears through by hand using
the pulley
19
so that gears mesh allowing you to change them. This should never be attempted or gears
shifted while the machine is operating.
WARNING: Never attempt to change gears while the Volu-Matic 200 machine is in operation. Always
change gears when the machine is completely shut down. Failure to do so can result in serious personal
injuries or a severely damaged transmission.
Gears Decal Instructions
19
17
18
Summary of Contents for CertainTeed Volu-Matic 200
