- 15 -
3. SAFETY INSTRUCTIONS
• No fire near of the equipment.
• Check that the suction pipes and return
cleaning liquid is properly inserted and
fixed in the corresponding deposit.
• Check that the suction pipes and return
liquid cleaner have no damage or are bent.
• Check the cleaning liquid level present
in the deposits. Cleaner liquid minimum
level should cover completely the filter
suction pipe.
3.3. CLOTHING AND P.P.E.
The operator must use anti-solvent/antacid
rubber gloves in order to make sure that the
hands do not come into contact with the products
used for washing.
The operator should always wear goggles to
avoid spraying the product, you can contact with
eyes.
The use of water-based products not exclude the
use of appropriate clothing and risk assessment
in relation to the working environment in accor-
dance with the law of each country.
3.4. SAFETY USE
It’s expressly forbidden to use or allow the use of
Double 250 by anyone who has not read com-
pletely, understood and assimilated exactly what
is written in this manual. It’s expressly forbidden
to use or allow the use of Double 250 by unquali-
fied personnel or personnel have not been
properly trained.
The Double 250 was built for washing parts or
small objects that are soiled with paint solvent
and water based.
If the cleaners come in contact with skin or eyes,
wash with plenty of water and seek medical
area.
It’s recommended that you familiarize yourself
with the control devices and their functions
before starting work.
3.5. NUMBER OF OPERATORS
Only one operator is needed to operate the
machine. The presence of other staff is only possi-
ble during the phases of installation, maintenan-
ce and dismantling.
In all instances, the staff that use the machine,
occasionally, must answer to the requisites
described in the previous paragraph.
3.6. INCORRECT USE OF THE MACHINE
The machine was designed with the intention for
professional use only.
Any other use may cause damage to the machine
and/or create dangerous situations for which the
manufacturer can’t be held responsible.
In particular:
The use of solvents containing chlorides or fluori-
des of carbon and substances with a base of
allogeneic hydrocarbons is expressly prohibited.
In addition, the machine must not be used for
washing or greasing of objects designed to come
into contact with foodstuffs.
National laws regarding the use and disposal of
products used for cleaning and washing parts
must be observed, as well as the elimination of
the machine itself.
3.7. GENERAL SAFETY AND ACCIDENT
PREVENTION
This machine must have as its primary objective
for the sole purpose for which it was expressly
designed. The manufacturer can’t be held respon-
sible for any damage to people, animals and
objects caused by improper, erroneous or unrea-
sonable use of the machine.
Disconnect the air supply to the machine before
performing any cleaning or maintenance.
In case of failure and/or malfunction of the
machine, turn off, not directly intervene; consult a
service center authorized by the manufacturer
and use only original spare parts.
The user is obliged to check the right environmen-
tal conditions (For example, low temperatures or
high) where the machine is located, which may
affect performance and/or severely damaged.
The use of equipment with an open flame or
welders or manipulate incandescent materials
near the Double 250 is expressly prohibited.
It’s expressly forbidden to place objects of sizes
and weights inadequate working on the floor.
