http://www.sapido.com.tw/
User Manual v1. 0.0
74
Item
Description
Enable Static Route
Enable or Disable dy namic route
IP Address
Destination IP address
Subnet Mask
Destination IP subnet mask
Gateway
Gateway IP address for destination
Metric
Metric number on router’s routing table
Interface
Static route rule for LA N or WAN interface
5.6.11 VPN Passthough
Virtual Private Networking (VP N) is typically used for work-related net working. For VP N tunnels,
the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP Pass-through.
Item
Description
IPSec Pass-through
Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through is
enabled by default. To disable IPSec Pass-through , select Disable
PPTP Pass-through
Point-to-P oint Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PP TP Pass-through, select Disable.
L2TP Pass-through
To allow the L2TP net work traffic to be forwarded to its destination
without the network address translation tasks.
IPV6 Pass-through
Allow IPV 6 packet to be forwarded to its destination without the
network address translation tasks.
