http://www.sapido.com.tw/
User Manual v1. 0.0
61
(4). Wireless dongle should connect to BRF70n
2.
Start PBC:
(1). Press the BRF70n WPS button and wait for WPS LED
blinking
(2). Press the dongle WPS button
(3). Wireless dongle should connect to BRF70n
5.4.6
WDS
When selected in the Basic Settings page and enabled here, Wireless Distribution System
(WDS) enables the router to be used as a wireless bridge. Two Wireless-N Routers in bridge
mode can communicate with each other through their wireless interfaces. To accomplish this,
all wireless routers should be set to the same channel and the MAC address of other AP /
Routers should be entered in the table.
The WDS explanation is as the following picture.
Router_A
：
Set the connection mode to “AP+WDS” from “Wireless Basic Setting”, and then select
the channel number (in this example is "11”). Click Apply Changes to save the setting.
