Sagem WP 1130, Instructions For Use Manual

Page: 7 / 60

4
MENU
MENU
MENU
Using the WP 1130
Setting the required language for the
handset
Press the MENU key several times until Telephone
appears on the display.
Press the OK key to confirm. HS Settings will then
appear on the display.
Press the OK key to confirm.
Press the MENU key several times until Set Language is
displayed.
Press the OK key to confirm.
Press the MENU key in order to scroll through the
available languages.
English – Deutsch – French – Nederlands – Spain –
Italiano
Press the OK key to select a language.
Press the <<< Back key several times or wait 20
seconds until the telephone has switched back to the idle
condition.
External calls
Press the ANSWER key and wait for the dialling tone.
Ext Call will then appear on the display.
Enter the required telephone number.
The number will then appear on the display.
Or...
Dial the number before you press the ANSWER key.
Enter the telephone number of your choice and it will
appear on the display.
If you make a mistake when entering the telephone
number, press the Back key to delete the inco rrect
figure.
Now press the ANSWER key in order to dial the number
you have entered.
Press the HANG UP key to end your call. The length of
your call will then be shown for five seconds on the
display.
Muting
During a call you can press the key under the word
Mute on the display in order to switch off the microphone.
As long as this option is activated, the word Mute will be
visible on the display and the handset will give an acoustic
signal.
Press the key once more in order to switch on the
microphone again.
Level of volume of the handset
Three volume levels are available.
You can adjust the volume during a call by pressing either
the bottom or the top of the VOL key.
If you wish to set the volume during a call, press the
bottom or the top of the VOL key repeatedly in order to
hear the three available volume levels.
Volume x (x = 1, 2 or 3) will be shown on the display.