Sagem WP 1130, Instructions For Use Manual

Page: 18 / 60

15
MENU
Press the OK key to confirm. BS Pin? will appear on the
display.
Enter the pin of the base station (default 0000).
Press the OK key to confirm.
If you have entered an incorrect pin, the error will be
acknowledged with an acoustic signal. Wrong Pin will appear
on the display followed by the Call Barring menu again.
CB1 XXXX Off will be displayed if the pin is correct. If you
enter a digit to display the barred number, the first number will
be automatically changed.
Press the Back key to correct any mistakes.
Press the SAVE key. CBX XXXX On will now appear on the
display.
If you press the Back key, the numbers will be shown one
after another again on the display giving you the possibility of
checking them.
Changing the dialling mode
You can set your telephone to tone dialling or pulse dialling.
The default setting is tone dialling.
You should only change this setting after consulting your
telephone network operator.
Press the MENU key several times until Telephone is
displayed.
Press the OK key to confirm.
MENU
MENU
MENU
MENU
MENU
Press the MENU key several times until BS Settings is displayed.
Press the OK key to confirm.
Making Link will appear briefly on the display.
Press the MENU key several times until Tele Config appears.
Press the OK key.
Press the MENU key until Dial Mode and the current setting are
alternately displayed (e.g. Tone ). Press the CHANGE key. Bs Pin?
will then appear on the display.
Enter the pin of the base station and then press the OK key. The
current setting will be shown (e.g. Tone ).
Use the MENU key to toggle between the settings Tone and Pulse .
Press the OK key in order to save your selection. The handset
will confirm by giving an acoustic signal.
Press the Back key several times or wait 20 seconds until the
telephone switches back into the idle condition.
Setting the timed break (R key)
The telephone call duration has been preset before the telephone
leaves the works. Only change this setting after contacting your
telephone network operator. He will tell you the value you should
set.
Press the MENU key several times until Telephone is displayed.