Sagem WP 1130, Instructions For Use Manual

Page: 20 / 60

17
MENU
MENU
MENU
MENU
MENU
MENU
Press the MENU key several times until Bs Settings is
displayed.
Press the OK key to confirm.
Making Link will appear briefly on the display.
Press the MENU key several times until Tele Config is
displayed.
Press the OK key.
Press the MENU key several times until Delay is shown on the
display.
Press the OK key.
The currently valid setting will then be displayed (e.g. Pause 2
s ).
Set the required delay by pressing the MENU key (between 1
and 5 seconds).
Press the OK key.
Press the Back key several times or wait 20 seconds until
the telephone switches back into the idle condition.
Changing the pin of the base station
The default pin of the base station is 0000.
Press the MENU key several times until Telephone is
displayed.
Press the OK key to confirm.
Press the MENU key several times until Bs Settings is
displayed.
MENU
Press the OK key to confirm.
Making Link will then appear briefly on the display.
Wait until this message disappears.
If Bs Settings is displayed once again, this means that the
handset cannot find a base station or the base station is not
plugged in. Try again.
Press the MENU key several times until Base Pin is displayed.
Press the CHANGE key. BS Pin? will appear.
Enter the pin of the base station.
Press the OK key.
If you have entered the incorrect pin, the error will be
acknowledged with an acoustic signal. Wrong Pin will appear
on the display.
New Pin? will then be displayed.
Enter the new pin.
Press the OK key.
New Pin? will then appear on the display again. Enter the new
pin once more in order to confirm.
If you have entered the incorrect pin, the error will be
acknowledged with an acoustic signal. Wrong Pin will appear
on the display.
Press the SAVE key.
This will be acknowledged with an acoustic signal.
Press the Back key several times or wait 20 seconds until
the telephone switches back into the idle condition.