26
Useful information
Use in combination with devices from other
manufacturers
The WP 1130 complies with the GAP guidelines (Generic
Access Profile). On account of this, you are able to use your
handset in combination with a base station made by another
manufacturer. The opposite also applies: Handsets from other
manufacturers can be registered with the base station of the
WP 1130.
Registering a WP 1130 handset at the base station of
another manufacturer
Register the handset as described on page 14. When you are
asked to enter the pin of the base station, enter the code of
the other base station (you will find the pin in the manual
supplied with the base station of the other manufacturer).
Registering the handset of another manufacturer at the
base station of the WP 1130
Follow the steps described in the manual supplied with the
handset of the other manufacturer. If required, switch the base
station into the registering mode as described in this manual.
Enter the pin of the WP 1130 base station with the handset of
the other manufacturer when you are asked to do so.
Maintenance and care
Care
Wipe the base station and the handset with a dry cloth
occasionally.
Do not use any scouring agents or solvents because these
can damage the device.
Positioning
Place the device in the vicinity of a power point and a
telephone outlet box. Keep it as far away as possible from
television sets.
Never expose the device to direct sunlight, extreme
temperatures or high air humidity.
Rechargeable batteries
Never dispose of batteries in the domestic refuse!
Defect and used batteries must be disposed of at the
designated collecting points.
Summary of Contents for WP 1130
Page 60: ...28 251194001...