Sagem WP 1130, Instructions For Use Manual

Page: 10 / 60

7
MENU
MENU
MENU
This is how you can change the name and the number:
Press the MENU key a second time. Press the key (left) in
order to delete the figures. Then enter the new number and
press the
OK key to save it.
Press the key (left) to delete the letters. Then enter the new
name and press the
Save key to store it.
Or
This is how you can delete the name and the number:
Press the key (left) to display the Del option on the screen
and then press the key (right) to select OK. An acoustic
signal will be given in order to confirm.
Entry Deleted will then appear on the display.
In order to delete all the numbers, select the option All Entries .
Enter the pin of the handset (default 0000) and confirm your
decision by pressing the
OK key.
All the telephone numbers in the directory will then be deleted.
Press the key (left) several times or wait 20 seconds until
the telephone switches back into the idle condition again.
Saving a dialled number in the directory
You can save one of the last three numbers which you have
dialled in the directory.
Press the MENU key several times until Directory appears on
the display.
Press the
OK key to display the numbers .
Press the MENU key first and then the NEW key to enter the
new number you would like to save.
Press the
key to make your selection .
The last number you have dialled will then appear on the
display.
( Empty will appear on the display if there is no entry in the list
of the last dialled numbers.)
Press the
key several times until the required number is
displayed.
Press the OK key to save .
Enter the name of the subscriber.
Press the Save key in order to save it .
Saved will then appear on the display accompanied by an
acoustic symbol.
The first entry in the telephone will then be shown.
Press the key (left) several times or wait for 20 seconds until
the telephone switches back into the idle condition again.
Searching for a handset (paging)
Use the Search/Register Handset button on the base station
to search for handsets which have already been registered
with the base station.
Press the Search/Register Handset button. The symbol will
then flash and all registered handsets will start to ring. Paging
will appear on the display.
The ringing of the handsets will stop automatically. However,
you can also press the key on the base station or the
ANSWER key of the respective handset.