Sagem WP 1130, Instructions For Use Manual

Page: 12 / 60

9
MENU
MENU
MENU
Activating/Deactivating the key beeps
You can determine whether the telephone should produce a
sound each time you press a key.
Press the MENU key several times until Telephone appears
on the display.
Press the OK key to confirm. HS Settings will be displayed.
Press the OK key to confirm.
Press the MENU key until Key Beeps and the currently valid
setting (e.g. On ) alternately appear.
Press the CHANGE key to change the setting .
The new setting will then be shown on the display (e.g. Off ).
You can also use the MENU keys to change between the
settings
On and Off.
Press the SAVE key to save your setting. An acoustic signal
will confirm it.
Press the Back key several times or wait 20 seconds until
the telephone switches back into the idle condition.
MENU
MENU
Changing the pin of the handset
The default pin of the handset is 0000.
You are able to change it.
This is how you can change the pin:
Press the MENU key several times until Telephone appears
on the display.
Press the OK key to confirm. HS Settings will then be
shown.
Press the OK key to confirm.
Press the MENU key several times until Handset Pin
appears on the display.
Press the CHANGE key in order to change the pin .
HS Pin? will then appear on the display.
Enter the pin.
Press the OK key to confirm.
An acoustic signal will confirm it and New Pin? will appear
on the display. You can now enter the new pin.
Press the OK key to confirm.
New Pin? will appear on the display again. Confirm the new
pin by entering it once more.
If you do not enter the same pin twice you will hear an
acoustic signal and Wrong Pin will appear on the display.
Press the SAVE key to change the pin. An acoustic signal
will confirm it and Handset Pin will be shown on the display.
Press the Back key several times or wait 20 seconds until
the telephone switches back into the idle condition.