Sagem WA 3050, Owner'S Manual

Page: 244 / 310

244
If you cannot connect to external power, turn off your
device to conserve energy until you can connect to it.
Warning
Your WA 3050 device contains a lithium-ion
polymer battery pack. There is a risk of fire and burns if
the battery pack is handled improperly. Do not
disassemble, crush, puncture, short external contacts, or
dispose of in fire or water. Do not attempt to open or
service the battery pack. Replace only with the battery pack
designated for this product. Dispose of batteries properly.
Your device also contains a coin-cell lithium battery. The
same precautions apply to handling this battery. There is a
danger of explosion and risk of personal injury if this
battery is incorrectly replaced or mistreated. Do not attempt
to recharge it, disassemble it, or immerse it in water or
dispose of in fire. Replace the coin-cell battery only with
the battery designated for this product. Dispose of used
batteries properly.
A simple way to conserve power is to turn off the backlight
whenever your device is idle. You can do this by holding
down the
PDA power ON/OFF button. You can also
adjust an interval after which the backlight is automatically
turned off. Review the procedures for adjusting the
backlight and power settings in “Customizing system
settings”.
Tip
When you finish making a call, press the PDA power
ON/OFF button to turn off the display and save power.
The phone will still be on and you will be able to receive
incoming calls.
To check power levels
§
Tap , Settings . On the System tab, tap Power .