Sagem WA 3050, Owner'S Manual

Page: 124 / 310

124
Caution Inserting any CompactFlash card without
taking precautions to ground yourself may result in
permanent damage to your device.
Network Settings will appear automatically the first
time you insert the card, so that you can configure the
Ethernet card. Most networks use DHCP, so you
should not have to change these settings unless your
network administrator instructs you to do so.
3. Tap . (If Network Settings does not appear, tap
then Settings . On the Connections tab, tap Network
then the adapter you want to change.)
4. Connect the Ethernet card to the network b y using a
network cable. For information, see your owner’s
manual.
If you want to synchronize your WA 3050, tap , then
Programs . Tap the Connections folder, then ActiveSync .
Tap Network Connection as the connection method then
tap Connect . Remote synchronization with a computer will
work only if you have set up a partnership with that
computer through ActiveSync and have set ActiveSync to
allow remote connections. Other restrictions apply. For
more information on synchronizing remotely, please refer
to the ActiveSync Help on the computer.
If you want to access your e-mail server or the intranet, tap
then Settings . On the Connections tab, tap Network
then the Identification tab. Enter your user information. If
you need assistance, see your network administrator.
Once connected, you can do the same activities described
at the end of “To create a modem connection to a network”.