Sagem WA 3050, Owner'S Manual

Page: 231 / 310

231
To set the option for showing call cost
1. Tap then Settings . On the Personal tab, tap
Phone , then Security . .
2. Tap Cost , which displays the PIN entry screen.
Use the stylus to type your PIN2 code. PIN2 codes
must be from 4 to 8 characters in length. If you make
an error, press and hold to delete what you typed
and reenter the code.
If you make three incorrect entries, the SIM card is
blocked and must be replaced or unlocked by your
carrier, who may provide a PIN Unlock Key (PUK). If
you select
Cancel , you will only be able to place
emergency calls (no PUK required) until your card is
replaced.
3. Tap Display call cost .
4. Tap and select a value for Currency .
5. Tap Phone units . Type the unit cost you pay as part of
your phone service in Price per phone unit .
6. Tap the Reset button next to Total call cost to reset
the total call cost to zero.
7. Tap .
To delete the Call Log when phone is turned off
1. Tap then Settings . On the Personal tab, tap
Phone , then General .
2. Tap Other .
3. Tap Delete Call Log when the phone is completely
off to activate this option.
4. Tap .