Sagem WA 3050, Owner'S Manual

Page: 240 / 310

240
15.13 Configuring your WA 3050 device
to use as a modem for your PC
If you need to connect to the Internet, send or receive
e-mail, or access a network or remote system from your PC
or notebook computer when a wall jack is unavailable, you
can configure your WA 3050 device for use as a modem
when it is connected to your computer via the serial cable
or cradle. The following conditions must be met to use this
feature:
§
The phone must be turned on
§
The COM port must be disconnected (in ActiveSync)
§
The option for using the phone as a modem must be
selected
By default, you can browse files on your WA 3050 device
from your desktop or notebook system and perform a
synchronization using ActiveSync when your device is
connected to your computer and a partnership has been
established. You cannot, however, browse files on your
WA 3050 device while using it as a modem.
When you are done using the WA 3050 as a modem, you
must reconfigure it for use as a phone to make or receive
calls. You will need to restart ActiveSync and reconnect
the COM port to synchronize files.
To configure your WA 3050 device for use as a
modem
1. In the ActiveSync window on your desktop or
notebook system, click
File , then Connection
Settings .
2. Click Allow serial cable or infrared connection to
this COM port so that it is unchecked.