Safran CORTEX RTR NeXt Series, User Manual

Page: 89 / 97

Radio Telemetry Receiver
User's Manual
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
© Safran Data Systems
– IMP000074 e14r1
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page 89

<udpSourcePort> tag
This field is used to set the UDP/IP source port.
Tag name Type Possible values Default value
udpSourcePort Integer 0 to 65535 10001

<udpDestPort> tag
This field is used to set the UDP/IP destination port.
Tag name Type Possible values Default value
udpDestPort Integer 0 to 65535 0

<udpSourceInterface> tag
This field is used to set the UDP/IP source interface (if value is 0.0.0.0, interface will be automatically
chosen by the operating system).
Tag name Type Possible values Default value
udpSourceInterface String xxx.xxx.xxx.xxx
(xxx : 0 to 255)
0.0.0.0

<udpTimeToLive> tag
This field is used to set the Time To Live value of each UDP frame.
Tag name Type Possible values Default value
udpTimeToLive Integer 1 to 5 2

<tPacketSent> tag
This field is used to enable or disable the sending of Time Packets.
Tag name Type Possible values Default value
tPacketSent String Disabled,
Enabled Disabled

<tPacketChannelId> tag
This field is used to fill the Channel ID field of the UDP Time Packet Header.
Tag name Type Possible values Default value
tPacketChannelId Integer 1 to 65535 1

<tPacketDateFormat> tag
This field is used to fill the bit 9 of the Time Packet Channel-Specific Data of the UDP Time Packet
Body.
Tag name Type Possible values Default value
tPacketDateFormat String IRIG, MandY IRIG

<tPacketTimeFormat> tag
This field is used to fill the bits 4 to 7 of the Time Packet Channel-Specific Data of the UDP Time
Packet Body
Tag name Type Possible values Default value
tPacketTimeFormat String IRIG-B IRIG-B