Safran CORTEX RTR NeXt Series, User Manual

Page: 88 / 97

Radio Telemetry Receiver
User's Manual
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
© Safran Data Systems
– IMP000074 e14r1
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page 88

<timeSource> tag
This field is used to fill the bit 6 of the Packet Flags of the UDP Packet Header.
Tag name Type Possible values Default value
timeSource String Primary,
Secondary Primary

<timeFormat> tag
This field is used to fill the bits 2 to 3 of the Packet Flags of the UDP Packet Header.
Tag name Type Possible values Default value
timeFormat String Chapter4,
IEEE1588,
ERTC Chapter4

<checksumSize> tag
This field is used to fill the bits 0 to 1 of the Packet Flags of the UDP Packet Header.
Tag name Type Possible values Default value
checksumSize String None,
8bits,
16bits,
32bits 32bits

<alignmentMode> tag
This field is used to fill the bit 21 of the PCM Packet Channel-Specific Data of the UDP Packet Body.
Tag name Type Possible values Default value
alignmentMode String 16bits,
32bits 32bits

<dataMode> tag
This field is used to fill the bits 18 to 20 of the PCM Packet Channel-Specific Data of the UDP Packet
Body.
Tag name Type Possible values Default value
dataMode String Throughput Throughput

<udpMode> tag
This field is used to set the UDP/IP mode.
Tag name Type Possible values Default value
udpMode String Unicast,
Multicast
Multicast

<udpAddress> tag
This field is used to set the UDP/IP destination address.
Tag name Type Possible values Default value
udpAddress String xxx.xxx.xxx.xxx
(xxx : 0 to 255)
239.255.11.10