CCTV TESTER User Manual
2
2. IP Camera Tester Introduction
2.1 General
The IPS touch screen IP camera monitor is designed for maintenance and installation
of IP cameras, analog cameras, TVI, CVI, AHD cameras, as well as testing 4K H.264
/4K H.265 camera by mainstream, The tester enables it to display network HD
cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ
and analog PTZ control. The combination of touch screen and key buttons make the IP
camera tester very user- friendly.
3. Operation
3.1 Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable
inside battery cabin should be disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be
well connected. Pressing the key
continuously can power on or off the tester.
Notice: Please use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically,
indicate the battery charging is completed.
Notice: When the Charge Indicator
turns off, the battery is approximately
90% charged. The charging time can be extended for about 1 hour and
the charging time within 12 hours will not damage the battery.
Notice:
Press the key
several seconds to restore the default settings when the
instrument works abnormally.
Notice:
While Charging, someone must be present.