CCTV TESTER User Manual
17
6.2 Network tool
(1) IP address scan
Connect the cable to the LAN port, click icon
to enter, Set your IP address
search range by changing the Start and End IP addresses. Click the “Start” button to
scan the IP address range. You can also input an IP address in the Port Number Scan
to scan for open ports.
(2) PING Test
Application:
PING testing is the most conventional network debugging tools. It is
used for testing if the connected. IP camera or other network equipment’s Ethernet
port is working normally and the IP address is correct.
It’s normal that the first data packet will be lost when test start.
(3) Network test (Ethernet bandwidth test)
To use the Network tester, you will need two IP testers. One is used as a Server and
the other as a Client. Both devices must be on the same network segment in order to
communicate.
(4) Port Flashing
Application:
The tester will send special signals to make the connected LAN port flicker at special
frequency, which will enable the installers to easily and quickly find the connected
Ethernet cable. This function can prevent mistakenly insertion or disconnection
non-corresponding cable to artificially interrupt network connection.