![background image](http://html1.mh-extra.com/html/safire/sf-tester-arm-5n1-4k/sf-tester-arm-5n1-4k_instruction-manual_3402804014.webp)
CCTV TESTER User Manual
11
5. Analog & HD Camera Testing
5.1 Analog camera test
Analog camera test and PTZ control.
Select relative function on the right side Toolbar to operate , functions including
“Photos”, “Snapshot”, “Record”, “Playback”, “PTZ”, “Set”.
Double-taps on the screen to make the image displayed full screen.
Check and set the protocols, address, interface and baud, all must be consistent with
the dome camera, then the IPC tester can test .After setting the parameter, the tester
can control the PTZ and lens.
5.2
CVI camera test
When HD CVI signal input, the tester will display the image resolution on the top bar.
Double-taps on the screen to make the image displayed full screen.
The tester supports resolution support up to 3840 x 2160P 12.5/15 FPS.
(
1
)
PTZ control
1.1 Coaxial PTZ control
Click the icon“PTZ”on the right toolbar to do the corresponding setting.
“Port”: select coaxial control
Enter PTZ address to perform parameters setting.